Before you throw out heaters, hot water systems, and gas appliances, know what to do!
· 7 min read

If you have older appliances, you can roll them out the front door. Different from heaters, hot water systems and gas appliances. They contain great metals that Divine Metal Recycling loves – however, they can be dangerous, containing electricity, gas, water, oil, or other materials.
This straightforward guide outlines what you need to do to get your appliance ready, whether it's still in your garage, backyard, or on the side of your house. The steps are simple, but it's important to follow each one so the appliance is ready to drop off.
Step 1: Know What You Have
The first step is to make sure that you know what appliance you are dealing with. Although simple, heaters and hot water systems come in several types to be aware of. There are two types of portable electric heaters: fan heaters and radiant bar heaters. These are easy to identify, as they consist of a small casing, a heating element, and a cord. Oil column heaters look like a small radiator on wheels and have a sealed oil charge between the radiator fins. Gas heaters can be freestanding or wall-mounted, and have pipework and valves that connect to the gas supply.
Hot water systems are larger. These are electric storage, gas storage, instant gas, and solar or heat pump systems. In addition to the above-mentioned components, solar and heat pump systems require other components like panels, pumps, or refrigeration circuits. If possible, locate the label or compliance plate on your appliance; this will show the type and model. This makes it a lot easier to discuss with Divine Metal Recycling.

Step 2: Ensure that There Is No Electricity
To ensure your safety, make sure you have completely unplugged it from its electrical power supply. Portable heaters should be unplugged and left to cool, as they can remain hot for a considerable time. If your appliance is hard-wired, such as a duct heater, a wall-mounted electric heater, or an electric hot water system, have a licensed electrician disconnect it. We don't recommend doing this yourself. The electrician can power off the appliance and render the wiring safe.
Be sure the worker caps the wiring or covers it if it is exposed. Uncovered wires can be extremely hazardous for others handling the appliance following you.
Step 3: Be Sure There Is No Gas
If there is a gas system (heating or hot water) connected to the building's gas line or appliance, a licensed gasfitter will need to isolate the gas and disconnect the appliance. Gasfitting is a regulated industry in Victoria—it isn't something you will want to try to do yourself. A licensed gasfitter will disconnect from the appliance, cap the gas line properly, and test the appliance to ensure there is no gas leaking.
Do not cut or loosen gas connections to save a "few dollars." Even a tiny leak can create big issues, as gas can accumulate in a confined space. Don't hesitate to evacuate if you ever catch a whiff of natural gas; avoid handling any switches, avoid using any flames, and call from a safe place the Gas Emergency Services or the necessary emergency services. When your appliance has been disconnected and the line capped, it may be disposed of as other heavy metal goods.
Step 4: Empty Any Water
Any water will need to be removed from a hot water system. A lot of liters can be stored in storage tanks, and when full, they are quite heavy. Typically, a licensed plumbing contractor will shut off the water supply and drain the tank. Your installer can do this for you and may even remove the old unit if you are replacing it.
Hot water tanks can also be equipped with an anode, a sacrificial rod that helps prevent corrosion of the tank. You don't have to remove it, but it is another reminder that hot water tanks are not just empty steel shells. Only be sure the tank is emptied.
Don't attempt to empty oil column heaters; they are sealed and must remain so. We will let Divine Metal Recycling know when contacting us.

Step 5: Look for Refrigerants
Not all heaters and hot water systems contain a refrigerant, but some do. The refrigeration circuit of heat pump hot water systems as well as reverse cycle air conditioners are sealed. Refrigerant recovery should be done by trained and licensed persons, as with fridges and freezers. If your appliance has sealed piping and a compressor, you should not attempt to cut or open the piping.
Solar hot water systems can have roof panels or collectors, a storage tank, and sometimes a pump. Other systems require a special fluid in the collectors or pipes. If you're changing or removing one from the customer's home, consult the installer on how to do it. Please share what you have with Divine Metal Recycling, and we can assist you.
Step 6: How to Move It
These machines are heavy and clumsy. Hot water systems are not only large and heavy when empty, but gas systems can also have sharp edges on the casing. Make a plan for lifting and moving your appliance before you begin. Use a trolley, thick gloves, and sturdy boots, and have someone help you. Store it upright, as directed by the manufacturer, and properly in your vehicle.
Make sure nothing is blocking your doorway or stairs. Don't hurry, and make sure you don't trip. The majority of heavy object injuries are the result of rushing or working by themselves.
Step 7: Remove Attachments Where You Can
If you can, remove anything you find dangerous.
Attachments can be removed to leave clean metal. For a portable heater, for instance, you might want to remove plastic knobs, handles, wheels, and any loose wires. If plastic fittings or outer insulation on a hot water system can be easily removed, it is a good option to take them off. This results in cleaner metal that is more available for grading.
Don't go overboard. Do not cut, force, or open anything unless needed. Don't remove any part that could contain gas, oil, fuel, or refrigerant. Don't take apart anything if you don't know what is in it. We would be better off leaving a bit of plastic on, rather than getting hurt.
Step 8: Contact Us
After you've followed all the instructions mentioned above, contact Divine Metal Recycling. Describe the appliance, whether a licensed tradesperson removed it, and any other information you believe is relevant, including whether it is oil- or refrigerant-based, or a solar system. We can let you know what we can take, how to do it, and whether anything else should be done.
We're not being picky. We don't want our clients to waste time traveling across town with something we don't want or need, and we want our team to know what to expect when they call. Metal prices fluctuate as well, which helps us determine how much the appliance might be worth.
What Happens Next?
After your appliance is turned in, it is classified as other scrap. It is identified, any special components are dealt with, and the metal is sorted into groups. For example, steel casings are not mixed with heating elements and piping made of copper, and copper wiring is not mixed with tanks made of steel. Brass and aluminum fittings are separated from each other. The metal is then weighed, graded, and sold to mills, where it is melted down to produce new products.
The old heater or hot water system you see may not look that impressive, but there's still a great deal of life left in that steel or copper. Recycling means the metal is used again, so less new metal has to be manufactured from raw ores.
In Summary
Know what you have. Ensure it is disconnected safely by a licensed electrician or gasfitter, as appropriate. If necessary, empty out what needs emptying. Don't open any sealed systems. Move it carefully. Securely detach any attachments. Then contact us. It's easy to do these simple steps and a tricky appliance becomes an easy one—and the metal goes on to a great new life.
Frequently Asked Questions
I have a gas heater, can it be recycled?
If it is switched off by a licensed gas fitter and the gas line is capped, the answer is generally yes. Please call to check what we can accept.
When and who should switch off my hot water system?
It should only be done by a licensed tradesperson. A plumber can cut off the water supply, and an electrician/gasfitter will be required, depending on the type of system. They can shut off the supply, drain the tank, and retrieve it safely.
Do I need to empty my hot water tank?
Yes. The hot water tank should be emptied before moving because it is very heavy when full and may leak. Most likely the tradesperson will do this for you.
I have a plug-in heater in my home that has oil in it; what should I do with it?
Keep the oil sealed and do not attempt to empty/open the oil. Let us know it is an oil-filled heater.
Is refrigerant used in hot water heat pumps?
Yes. They run a sealed refrigeration system, with refrigerant to be recovered by trained and licensed persons. Don't cut into the piping.
I've found some plastic components on my heater; can I take them out?
Only if they can be easily removed; do not open any closed parts!
May I bring in an appliance plugged into the wall?
Not at all – Appliances must be disconnected first! An appliance which is hard-wired or connected to gas should only be disconnected by a licensed tradesperson.
Where can I get an estimate of the value of my old appliance?
Metal prices can fluctuate; please call for a quote.