Inside Your Old Air Conditioner: A Teardown of Every Metal Hiding in There

· 9 min read

Divine Metal Recycling worker using pliers to separate copper tubing from an air conditioner coil at a metal recycling yard

The first thing most people notice about an old split-system air conditioner is its size, bulk, and outdated appearance. It's on the wall or by the house, and the only thing left to decide is how to dispose of it. But if you cut up that machine and spread its parts on a bench, you'd see something else. You'll see a collection of metals, each performing a specific role, and each having a value to a recycler.

At Divine Metal Recycling, we consider an old air conditioner a metal parts kit in plastic panels. This teardown takes you through the unit, one piece at a time, from the outside in, revealing what it contains and why it matters when it's time to take it apart and recycle it.

Stage One: The Outer Shell

Start with the visible top. The outdoor part of a split system is contained within a casing that needs to withstand all the elements of Melbourne weather, including sun, rain, dust, and years. For this reason, the casing is typically constructed of steel and painted to prevent rusting. This is the heaviest single metal piece in most outdoor units, and the most overlooked, as it appears to be a basic box.

The first layer consists of the steel panels, base frame, and protective grill over the fan. These parts are classified as steel when a unit is stripped for recycling, and steel is among the most recycled materials in the world. It is also magnetic and therefore easy to separate from the more valuable non-ferrous metals inside. A simple fridge magnet will stick to the casing and base, but will slide off the copper and aluminium sections further in.

The indoor unit's exterior is different. The wall-mounted head in the living room or a bedroom is mostly plastic, with a thin metal frame behind it. The metal in the indoor unit is hidden behind the front cover, and we'll get to it soon.

Divine Metal Recycling worker using pliers to separate copper tubing from an air conditioner coil at a metal recycling yard

Stage Two: The Fan and the Motor

The outdoor unit has a fan behind the grill. The blades will be plastic or metal depending on the make and age of the unit, but the interesting part is in the middle. The electric motor that powers the fan is essentially a collection of copper.

Inside the motor housing, thin copper wire is wound tightly around a steel core. Electricity runs through the copper windings, creating a magnetic field that spins the shaft. Steel laminations hold these windings in place and direct the magnetic field. So you have one small motor with two metals: copper wire around a steel core, plus a shaft and a housing, typically steel or aluminium.

There's also a motor in the indoor unit. It operates the blower that circulates air through the room, and has a similar structure. The smaller motors aren't much on their own, but across a whole unit they add up, and a good recycler doesn't just take apart an air conditioner and hope for the best.

Stage Three: The Coils and Fins

We are now at the part of the air conditioner that actually moves heat. A split system has two coils: one in the outdoor unit (the condenser coil) and one in the indoor unit (the evaporator coil). They look like a mass of fine metal fins and are among the most valuable components of the entire machine.

Both metals work together here. Narrow tubes are wound through the coil, and in most units these tubes are copper. Copper is a good conductor of heat, which is what you want when refrigerant moves to or from a building. The copper tubes are pressed against hundreds of very thin fins, typically made of aluminium. The fins increase the surface area, allowing air to remove heat rapidly from the tubes.

Recycling yards handle this combination carefully. Both copper and aluminium are valuable but have different values, and a coil left as a single lump combines both types. A well-run recycler can remove the copper tubes from the aluminium fins and treat the two metals separately. It requires some work, and it's one reason to take an old unit to a business that knows how it works, rather than handing it over as general scrap.

Some modern units use all-aluminium coils instead of copper and aluminium. These are lighter and more common in newer designs, but a coil's composition varies by age and brand.

Stage Four: The Compressor

The compressor is the heart of the system, and the coils are the lungs. It is typically the densest part you will encounter: heavy, dark, sealed, and placed very low in the outdoor unit.

The compressor squeezes the refrigerant gas to transfer heat from inside your house to the outside air. The shell is made of steel, which is why it is so heavy to lift. The motor sits inside that shell and, like the fan motor, consists of copper wire coils wound around a steel frame, only much larger. This makes the compressor one of the most valuable parts of an old unit, because it holds much more copper than a fan motor.

There is one crucial point to note. The compressor contains oil, and the system contains refrigerant. Refrigerants must be recovered safely before a unit can be taken apart. In Australia, refrigerant handling is regulated and must be carried out by an appropriately authorised person. This is no job for a backyard hammer and hacksaw. A responsible recycler understands this, and so should anyone who wants to take apart a unit.

Divine Metal Recycling worker dismantling an old split system air conditioner outdoor unit with compressor and copper pipes

Stage Five: Pipes, Valves and Fittings

The pipes that connect the indoor and outdoor units are called refrigerant pipes. These are typically copper, sometimes with foam insulation, and carry refrigerant from one side of the system to the other. They usually pass through a wall and run around the exterior of a house, and when the unit is removed, they are either left behind or cut short.

The pipes end in service valves and fittings at the outdoor unit. Many of these are brass, an alloy of copper and zinc. Brass is another valuable scrap metal, and it's worth separating from plain copper pipe. These valves and connectors may be small, but they are exactly the kind of part that gets tossed when no one knows what they are.

Remember the insulation on the pipes. It is not metal and has no recycling value, but it is worth removing so the pipe arrives clean. Clean material is easier to evaluate and easier to recycle.

Stage Six: The Wiring and the Electronics

When you open the electrical compartment on the outdoor unit, you'll find a terminal block, capacitors, and a control board. Behind the front panel of the indoor unit, you'll find another control board.

The wiring is copper insulated with plastic. Although thin, it adds up to a surprising length, running from the motors, through the compressor, to the boards and to the power connection. Insulated copper wire can be recycled, and the copper is stripped from the plastic insulation.

The circuit boards are another matter. These small green or brown boards contain a small quantity of many metals, including copper tracks, solder, and sometimes trace metals found in electronic parts. This is why electronics are recycled separately from bulk metal. Those small quantities must be processed specially so they can be recovered and so harmful substances aren't deposited in the wrong places.

Stage Seven: The Small Parts That Add Up

After the large parts are removed, a teardown reveals many small metal pieces that are easy to overlook. These include screws, bolts, and steel brackets, as well as mounting plates, typically made of steel or aluminium. The indoor unit has louvres, rails and support frames, some plastic and some metal. Then there's the wall-mounting bracket, typically a flat metal plate that stays on the wall even when the unit is down.

None of these parts alone is worth much, but together they make up a substantial portion of the unit's weight. A good recycler sorts and weighs everything, since small pieces sorted into the wrong pile can diminish the value of the whole batch.

What the Teardown Tells You

Put the entire unit back together in your mind and a clear picture forms. An old split system consists of steel for strength, copper for conducting heat and electricity, aluminium for light and efficient fins, brass for valves and fittings, and a small amount of electronics on top. This blend of valuable metals isn't concentrated in one place; it's spread throughout.

That is why how you dispose of an old air conditioner matters. Each of those metals is wasted if the unit leaves with general rubbish or is dumped without a thought. If you send it to a recycler who understands air conditioners, they can separate and treat each metal correctly and return it to the production process. Copper and aluminium can be recycled again and again without losing value, so a properly recycled unit can become part of something new.

Before You Bring Your Unit In

If you have an old air conditioner, keep a few things in mind. First, never attempt to service or drain the refrigerant. It must be recovered by someone with the authority to do so, and that is where you'll most likely need professional help. Second, never try to open sealed components, such as the compressor, at home. Third, leave the unit as complete as possible. Pulling out the copper yourself can create problems and make it harder for a recycler to separate the different metals. If you have any doubts, talk to Divine Metal Recycling before taking any action. A quick conversation can save time and help keep the job safe.

Conclusion

An old air conditioner may look dated on the outside, but inside it is a well-organised package of steel, copper, aluminium, brass, and electronics. Every part serves a purpose, and every metal has a second life. Once you understand what's inside, it's easier to see why recycling it properly matters.

If you have a split system air conditioner that's at the end of its life, we're here to help. We know what's inside and how each metal should be treated, and we'd rather see your old unit get a second life than end up in the bin.

Frequently Asked Questions

Which metals are contained in an old split system air conditioner?

The major materials are steel in the casing and frame; copper in the coils, pipes, motors, and wiring; aluminium in the fins; and brass in the valves and fittings. Small quantities of other metals are also present in the circuit boards.

Where would you find the largest amount of copper in an air conditioner?

The compressor and coils typically contain the most. The compressor motor has a significant amount of copper in its windings, and the coil tubes are often copper as well.

Is it safe to remove the copper from my air conditioner?

It is best not to. Have a person authorised to recover refrigerant do so before the system is opened, and avoid taking parts apart, as it can reduce value and mix metals. It is better to have a recycler disassemble the unit.

Why should I avoid releasing the refrigerant in an air conditioner?

Australia regulates refrigerants because they can damage the environment if released. They can only be recovered by persons who have the necessary authorisation.

Are the circuit boards in an air conditioner recyclable?

Yes. Circuit boards contain small quantities of metals, which are processed with electronics rather than with bulk metals.

Do aluminium fins and copper tubes get separated?

Yes, in a careful recycling process. Copper and aluminium have different values, so they are separated to improve outcomes for both metals.

Do all air conditioners use the same metals?

Not exactly. Most units have copper and aluminium coils and steel casings, while some newer models have all-aluminium coils. The exact composition varies by brand and age.

What should I do before I drop off my old air conditioner at a recycler?

Never drain or open any part of the system. Keep the unit as complete as possible, and check with your recycler if you have any questions.