Appliance Recycling Cheat Sheet: Which Household Items Contain Valuable Metal
· 9 min read

Most people look at an old appliance and see a problem. The washing machine that finally gave up, the oven that was replaced during the renovation, the heater that hasn't worked since last winter. They're heavy, awkward and taking up space. What most people don't see is what's inside. Behind the plastic knobs and painted panels, household appliances are full of steel, stainless steel, aluminium and copper, and those metals are exactly what a recycler is looking for.
This cheat sheet walks through your home appliance by appliance, so you can see where the metal is, what to leave alone and how to get an old machine ready for recycling. At Divine Metal Recycling, we'd rather see these items recovered than buried, and a little knowledge goes a long way. Keep in mind that the amount and type of metal varies with the make, model and age of each appliance, so use this as a guide, not a guarantee.
Three Quick Rules Before You Start
Rule one is to use a magnet. It sticks to steel and iron but not to aluminium, copper, brass or most stainless steel, so a simple fridge magnet will tell you a lot about what you're dealing with. Rule two is to remember that motors and compressors usually contain coils of copper wire, which is part of why appliances with motors tend to be worth recovering. Rule three is to treat any appliance as potentially hazardous until you've checked it. Unplug it, let it cool, and never open or cut into anything that holds refrigerant, gas, fuel or a stored electrical charge. When in doubt, ask before you lift a tool.

The Kitchen
Fridges and freezers. The outer shell is usually steel, and the compressor contains steel and copper, with copper and aluminium tubing running through the unit. The cooling system also holds refrigerant gas, which in Australia must be removed by appropriately licensed people. That means you should never puncture the pipes, cut the unit open or let it be crushed. Empty it completely, clean it out, and ask Divine Metal Recycling how it should be handled. If it's an older unit with a latching door, ask about removing the door before storage, since an abandoned fridge can be a hazard for children.
Dishwashers. Many have a stainless steel tub, along with a motor, a pump and copper wiring. Because the tub is often the biggest piece of metal, a dishwasher is usually a better candidate for recycling than people expect. Remove any loose plastic-coated wire racks if you can, and drain the machine before moving it.
Ovens, stoves and cooktops. These are generally steel and stainless steel, with some aluminium parts and electric elements. Glass doors and panels add weight but not metal value, so ask whether they need to be removed. If the appliance runs on gas, it should be disconnected by a qualified person before anyone tries to move it. Never assume a gas line is safe just because the appliance isn't in use.
Microwaves. The casing is steel, and inside there's a transformer containing copper. The warning here is serious. Microwaves contain components that can hold a dangerous electrical charge even when unplugged, so don't take one apart to get at the metal. Leave it intact and ask what can be accepted.
Range hoods. These are typically stainless steel or aluminium, with a small motor and fan. They're light, easy to move and often forgotten during a kitchen renovation. Remove the filters and any plastic parts if it's quick to do so.
The Laundry
Washing machines. The outer body is generally steel, the drum is often stainless steel or galvanised steel, and the motor contains copper windings. Some machines also have heavy counterweights, which may be concrete rather than metal, so don't assume every kilogram is worth the same. Drain the machine, disconnect the hoses and secure the door or lid before moving it.
Clothes dryers. The drum and casing are typically steel, and there's a motor and an electrical heating system inside. Dryers are relatively simple machines, which makes them easy to separate and handle. Clear out the lint, and check the drum for anything left behind.
Heating, Cooling and Hot Water
Split system and portable air conditioners. Air conditioners contain copper tubing, aluminium fins and a compressor that includes steel and copper. They also contain refrigerant, so the same rule applies as for fridges: licensed handling only, and no cutting or removing of pipes at home. If you have a split system to get rid of, we have more on the process on our split system AC recycling page.
Hot water systems. Most are built around a steel tank, with copper pipework and fittings, and some have copper or other metal elements or components. They're heavy, they may still contain water, and gas units need to be disconnected by a licensed professional. Don't try to lift a full system. Ask about pickup if you're replacing one.
Heaters and fans. Electric heaters have steel and aluminium bodies, copper wiring and sometimes a small motor. Fans have a motor with copper windings and a body in steel, aluminium or plastic. They're small enough to move yourself, and the cord is worth keeping attached, since it's copper wire.
The Garage, Shed and Backyard
Lawnmowers, whipper snippers and other garden machines. Engines and decks are usually steel or aluminium. Before anything with an engine goes anywhere, drain the fuel and oil safely and remove the battery if there is one. Fuel left in a machine is a fire risk and a safety problem for anyone handling it.
Barbecues. The body may be steel, stainless steel, cast iron or aluminium, depending on the model. Remove the gas bottle completely, clean off as much grease as you reasonably can and take out any non-metal parts such as plastic shelves and wheels if they come off easily.
Power tools. Corded tools contain motors with copper windings, and they usually have steel and aluminium parts. Remove any batteries before bringing them in, as lithium batteries need to be handled separately from scrap metal.
Bikes, trolleys and workshop gear. Not strictly appliances, but they tend to be found in the same corner of the shed. Steel frames, aluminium parts and wheels are all recyclable, so don't leave them out. For a bigger sort-out, our shed and workshop clean-out guide shows how to tackle the whole space, and a business clean-out needs the same care with fridges and air conditioners.
The Smaller Stuff Worth Keeping
Vacuum cleaners, kettles, toasters and irons. Small appliances contain a mix of steel, stainless steel, aluminium and a little copper, with motors in the vacuums. Individually they're light, but a box of them adds up, and they're easy to collect over a few weeks. Remove the cords if you can, or leave them attached, but keep them clean and dry.
Extension leads, power boards and old cables. The value here is the copper wire inside. Plastic coating and plugs reduce what a recycler can recover, so ask how they should be presented, and keep them separate from the steel.
What Doesn't Belong in the Scrap Pile
Some items look like appliances but need different handling. Televisions, computer monitors, laptops and other electronics are e-waste, and they're generally dealt with through different channels from plain scrap metal. Any appliance with a battery should have the battery removed first, since lithium batteries can start fires if crushed or damaged. Gas bottles, fuel, oil, paint and chemicals should never be left inside or attached to anything you bring in. And anything holding refrigerant, like fridges, freezers and air conditioners, should be handled by licensed people and never opened at home. If you're unsure about a particular item, a quick question to Divine Metal Recycling is better than guessing.
How to Prepare an Appliance in Five Minutes
Preparing an appliance doesn't take long, and it makes the whole process smoother. Unplug it and let it cool. Empty it completely, including shelves, drawers, drums and trays. Clean off food, grease and dirt where you can. Remove any batteries, gas bottles, fuel or liquids. Take off non-metal parts that are quick and easy to remove, such as glass, plastic trays and timber panels. If you're moving it yourself, use two people for anything heavy, wear gloves and sturdy shoes, and secure doors and loose parts so they don't swing open on the way.

Moving It and Getting It Recycled
How you move it depends on its size. Small appliances and loose cords can go in a car boot, and a ute will take the mid-sized items. For the heavy ones, such as fridges, washing machines, hot water systems and ovens, it's worth asking Divine Metal Recycling whether pickup is available for your area and what needs to be ready beforehand. Ask about the current rate for the metals you have, keeping in mind that any price is a guide for the day, since metal markets move and the final figure depends on the weight and what's actually in the load. Depending on where you live, you may also be asked to show identification, and payment may be made by bank transfer rather than cash, so check before you go.
Ready to Clear Out the Old Appliances?
Once you know where the metal is, an old appliance stops looking like a problem and starts looking like a recoverable resource. Check it, prepare it, ask about anything unusual, and move it safely. Contact Divine Metal Recycling to ask about current rates, what you can bring and your options for heavy items, and give your old appliances a second life as new metal.
Frequently Asked Questions
Which household appliances usually contain the most metal?
Large appliances such as fridges, washing machines, dryers, dishwashers, ovens and hot water systems tend to contain the most metal by weight. The exact amount varies by model, so ask Divine Metal Recycling if you're unsure.
Does it matter if an appliance still works?
Not for recycling. A working appliance may be worth passing on or donating first, but one that's broken, outdated or no longer wanted can be recycled for the metal inside.
Should I take the motor or compressor out myself?
Generally no. Compressors are part of sealed systems that contain refrigerant, and motors can be difficult to remove safely. It's usually better to bring the whole appliance in and let the recycler deal with it.
Can I bring in a fridge or freezer?
Fridges and freezers contain refrigerant, so they need to be handled by appropriately licensed people. Ask Divine Metal Recycling how to arrange this before you move one, and never cut or puncture the pipes.
What should I do with the gas bottle from my barbecue?
Remove it completely and keep it separate. Gas bottles should not be left attached to anything you bring in, so ask how to dispose of one safely.
Can I recycle appliances that still have food, water or fuel inside?
It's best to empty them first. Drain washing machines and hot water systems, clean out fridges and ovens, and drain fuel and oil from garden machines, so they're safe to handle and transport.
Are televisions and computers treated as scrap metal?
They're usually classed as electronic waste and are handled differently from plain scrap metal. Ask what can be accepted before you bring them in.
How do I find out what my appliances are worth?
Contact Divine Metal Recycling and describe what you have. The price depends on the metals, the weight and the market on the day, so treat any quote as a guide rather than a promise.